Nailor BAC-8001-36 Installation And Operation Manual page 6

Actuator Specifications
Torque
Angular rotation
Motor timing
BAC-8001-36,BAC-8005-36, BAC-8007-36
Motor timing BAC-8205-36
Shaft size
Regulatory
• UL 916 Energy Management Equipment.
• BACnet Testing Laboratory listed as an application specific controller (ASC).
• CE compliant.
• SASO PCP Registration KSA R-103263.
• FCC Class B, Part 15, Subpart B and complies with Canadian ICES-003 Class B.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Installation
Supply voltage
Weight
Case material
Environmental limits
Operating
Shipping
Humidity
Dimensions
6.53"
(166)
4.89"
(124)
Date: 10-2016 Supersedes: 7-2016
Nailor reserves the right to change any information concerning product or specification without notice or obligation.
Installation and Operation Manual
40 in-lb. (4.5 N.m)
0 to 95°
Adjustable end stops at 45° and 60° rotation
90 sec./90° at 60 Hz
108 sec./90° at 50 Hz
60 sec./90° at 60 Hz
Directly mounts on 3/8 to 5/8 inch (9.5 to 16 mm) round or 3/8 to 7/16 inch
(9.5 to 11 mm) square damper shafts.
24 volts AC, -15%, +20% 5 VA, 50/60 Hz
13.2 ounces (376 grams)
Flame retardant plastic
32 to 120° F (0 to 49° C)
–40 to 140° F (–40 to 60° C)
5 – 93% relative humidity (non condensing)
4.25" (108)
Page 6 of 48
EZvav Digital Controls
●
4.14" (54)
0.77"
1.92" (49)
(19)
6"
(152)
IOM-EZVAVINST