Nailor BAC-8001-36 Installation And Operation Manual page 43

Procedure to set up network communications (continue)
PROCEDURE
2 Select the CNFG display.
3 Enter the device instance.
4 Enter the MAC address.
5 Enter the baud.
6 Advance or exit.
Date: 10-2016 Supersedes: 7-2016
Nailor reserves the right to change any information concerning product or specification without notice or obligation.
Installation and Operation Manual
1. From the CNFG display, press the
to advance to COMM display.
2. Press the button. The display advances to DID.
∆
1. Press the or buttons to change the first digit.
2. Press the button to select the next digit. Repeat
for all seven digits.
3. When the button is pressed for the last digit, the
display changes to MAC.
∆
1. Press the or buttons to change the MAC
address.
2. Press the button to save the selected MAC
address.
The display changes to BAUD.
∆
1. Press the or buttons to select a new baud.
2. Press the button is save the selected baud.
The display returns to COMM.
∆
1. Press the or buttons to select one of the
following:
• BLNC or CNFG options
• EXIT to return to the temperature display.
2. Press the button to select the next function
Page 43 of 48
EZvav Digital Controls
●
STEPS
∆
or buttons
STE DISPLAY
CNFG
COMM
D ID
OO72O69
MAC
11
BAUD
384OO
COMM
IOM-EZVAVINST