Nailor BAC-8001-36 Installation And Operation Manual page 46

Table 9–5 Binary value objects
Object
BV1 NEED AHU
BV2 NEED COLDER SPLY
BV3 NEED MORE STATIC
BV4 LOCAL OVRD
BV5 MOTION OVRD
BV6 MOTION SENSOR
BV7 NEED HOTTER SPLY
BV8 CHANGE OVER MODE
BV9 DAT LIMITING
BV10 CLOCKWISE CLOSE
BV11 AUTO OCCUPANCY
BV12 BALANCE MODE
BV13 DAT SENSOR
BV14 PRI BAL TRIGGER
Table 9–6 Multistate value objects
Object
MSV1 OCCUPIED MODE
MSV2 FAN CONFIG
MSV3 REHEAT
MSV6 WALL SENSOR
Loop objects
BACnet PID loops are used for modulating the damper and controlling reheat.
Table 9–7 PID control loop objects
Object
LOOP1 CL LOOP
LOOP2 HT LOOP
LOOP3 DAT Loop
Date: 10-2016 Supersedes: 7-2016
Nailor reserves the right to change any information concerning product or specification without notice or obligation.
Installation and Operation Manual
Name
Name
Name
EZvav Digital Controls
●
Description
Need For AHU
Need For Colder Air Supply
Need For AHU
Local Override Mode
Motion Override Mode
Motion Sensor (Wall Stat)
Need For Hotter Air Supply
SAT Changeover Mode
Discharge Air Temp Limiting
Clockwise Close
Auto Occupancy Detection
Balance Mode
DAT Sensor Present
Primary Balance Trigger
Description
Occupied Mode
Fantype Configuration
Reheat Type
Multi-state Value #6
Description
Cooling Loop
Heating Loop
Discharge Air Temp Loop
Page 46 of 48
IOM-EZVAVINST