Table of Contents
Advertisement
Procedure to set the airflow set points (continue)
PROCEDURE
2 Select the set point settings
display.
3 Set the cooling minimum airflow
limit.
4 Set the cooling maximum airflow
limit.
5 Set the auxiliary airflow set point.
Not used in all models.
Tip: Set value to match Min.
Cooling airflow if not required.
6 Set the heating minimum airflow
limit.
7 Set the heating maximum airflow
limit.
8 Set the minimum limit for fan
speed.
Not used in all models.
Date: 10-2016
Supersedes: 7-2016
Nailor reserves the right to change any information concerning product or specification without notice or obligation.
Installation and Operation Manual
1. From the CNFG display, press the
to show the CNFG display.
2. Press the
button to select the CNFG options.
The display changes to STPT.
∆
3. Press the
or
FLOW.
4. Press the
button to select FLOW. The display
changes to MNCL.
∆
1. Press the
or
for cooling airflow. The set point changes in 1 CFM
increments.
2. Press the
button to save the set point and
advance to the next function.
∆
1. Press the
or
for cooling airflow. The set point changes in 1 CFM
increments.
2. Press the
button to save the set point and
advance to the next function.
This set point sets the airflow for when reheat is active.
∆
1. Press the
or
auxiliary airflow. The set point changes in 1 CFM
increments.
2. Press the
button to save the set point and
advance to the next function.
∆
1. Press the
or
for heating airflow. The set point will change in 1
CFM increments.
2. Press the
button to save the set point and
advance to the next function.
∆
1. Press the
or
for heating airflow. The set point will change in 1
CFM increments.
2. Press the
button to save the set point and
advance to the next function.
∆
1. Press the
or
for the fan speed. The set point will change in 1%
increments.
2. Press the
button to save the set point and
advance to the next function.
Page 20 of 48
EZvav Digital Controls
●
STEPS
∆
or
buttons
buttons to change the display to
buttons to set the minimum limit
buttons to set the maximum limit
buttons to set a value for the
buttons to set the minimum limit
buttons to set the maximum limit
buttons to set the minimum limit
STE DISPLAY
CNFG
STPT
FLOW
MNCL
OO
MXCL
3SO
!58&
MNHT
OO
MXHT
3 S O
-).&
/
IOM-EZVAVINST
Advertisement
Chapters
Table of Contents
