Nailor BAC-8001-36 Installation And Operation Manual page 45

Table 9–4 Analog value objects (continue)
Object
AV8 UNOCC HT STPT
AV9 MIN CL STPT
AV10 MAX HT STPT
AV11 MIN STPT DIFF
AV12 STBY DIFF
AV13 MIN COOL FLOW
AV14 MAX COOL FLOW
AV15 MIN HEAT FLOW
AV16 MAX HEAT FLOW
AV17 AUXILIARY FLOW
AV18 PRI K FACT
AV19 PRI CORR SLOPE
AV20 PRI CORR OFFST
AV21 PRI LO FLOW CORR
AV22 PRI FLOW STPT
AV23 PRI RAW FLOW
AV24 PRI ACTUAL FLOW
AV32 MIN FAN SPEED
AV33 MAX FAN SPEED
AV36 DAT STPT
AV37 SAT CHANGEOVER
AV38 LOCAL OVRD TIME
AV39 STANDBY TIME
AV40 STANDBY TRIGGER
AV43 MEASURED MAX
AV44 MEASURED MIN
AV45 PRI SAVE MIN FLO
AV47 DAT MAXIMUM
AV48 CW DMP POS
AV49 CCW DMP POS
AV50 DAMPER POSITION
AV55 CHNG_OVER_DELAY
AV56 LOW AUTO OCC
Date: 10-2016 Supersedes: 7-2016
Nailor reserves the right to change any information concerning product or specification without notice or obligation.
Installation and Operation Manual
Name
EZvav Digital Controls
●
Description
Unoccupied Heating Set point
Minimum Cooling Set point
Maximum Heating Set point
Minimum Set point Differential
Standby Differential
Minimum Cooling Flow
Maximum Cooling Flow
Minimum Heating Flow
Maximum Heating Flow
Auxiliary Flow
Primary K Factor
Primary Correction Slope
Primary Correction Offset
Primary Low Flow Correction
Primary Flow Set point
Primary Raw Flow
Primary Actual Flow
Minimum Fan Speed
Maximum Fan Speed
Discharge Air Temp Set point
SAT Changeover Temperature
Local Override Timer
Standby Timer (motion)
Standby Trigger
Measured Maximum
Measured Minimum
Primary Saved Minimum Airflow
Maximum DAT Set point
CW Damper Position (BAC-8205-36 only)
CCW Damper Position (BAC-8205-36 only)
Damper Position (BAC-8205-36 only)
Cooling Change Over Delay
Low Limit for Auto Occupy
Page 45 of 48
IOM-EZVAVINST