Ethernet/Ip - Emerson Wireless 1420 Gateway Reference Manual

Reference Manual
00809-0200-4420
Table 5-2: Predefined Modbus Registers
Description
SYSTEM_DIAG.TEST_UNSIGNED_BYTE
SYSTEM_DIAG.TEST_SHORT
SYSTEM_DIAG.TEST_UNSIGNED_SHORT
SYSTEM_DIAG.TEST_INT
SYSTEM_DIAG.TEST_UNSIGNED_INT
SYSTEM_DIAG.TEST_FLOAT
5.5

EtherNet/IP

5.5.1 EtherNet/IP Communication settings
It is important that the Ethernet/IP communication settings in the Gateway match the
setting in the Ethernet/IP master or client. Refer to host system documentation for more
information on how to configure these settings or to the Emerson Wireless Gateway
Integration
can be found by navigating to System Settings → Protocols → EtherNet/IP. Network
architectures should reflect that of a DeltaV
unique_72_Connect_42_Ram24704.
Note
Ethernet/IP can be integrated with any approved Ethernet/IP ODVA member. Other
protocols such as HARTIP are still functional within the Gateway. See the Emerson Wireless
Gateway
Emerson.com/Rosemount
Reference Manual for Ethernet/IP. The Ethernet/IP communication settings
Product Data Sheet for ordering options.
Operation and Maintenance
(continued)
Register
49033
49034
49035
49036
49038
49040
™
system see #unique_72/
September 2020
Data type
8-bit unsigned int
16-bit int
16-bit unsigned int
32-bit int
32-bit unsigned int
32-bit float
53