View System Log - Tynetec Altec Response Installation Manual

9. VIEW SYSTEM LOG
Details of the last 128 alarm calls are stored in memory.
From the Main Menu display scroll down to  System Log 
The display will show details of the last alarm call, see example below;
Use the   keys to scroll back/forward to view previous alarms.
Press the  key to exit the mode.
10. LOAD DEFAULTS
From the Main Menu display scroll down to  Load Defaults 
The display will show the Load Defaults options;
Scroll down past  Log Defaults 
Select the "Defaults" you want to load then press the   keys to set on "" or off "X".
 System Defaults 
 Radio Defaults 
 Log Defaults 
 Sensor Defaults 
 Power Off 
Multiple defaults can chosen with a "" and applied simultaneously.
Press the  key to select  Apply 
This will also exit the menu.
Doc No. FM0548 issue B Page 8
Main Menu
Radio Devices
Audio Setup
 System Log
System Log 004
Smoke Alarm
Room 000010
 Hallway
Main Menu
 Load Defaults
Create Sensor
Exit
Load Defaults
 System Defaults
Radio Defaults
Log Defaults
and the display will change to;
Load Defaults
 Sensor Defaults
Power Off
Apply
clears all programming from memory
clears all radio devices from memory
clears all alarm call history from memory
clears all custom sensors from memory (see section 13)
Turns the Altec Response unit off (see section 12)
then press the ENTER key.
and press the ENTER key.
V1.00A


Exit 

and press the ENTER key.
V1.00A



X 
X
X


X
X