Deleting Radio Devices; Manual Add/Edit Radio Devices - Tynetec Altec Response Installation Manual

5. DELETING RADIO DEVICES
This procedure can only be used if you still have the device to be deleted, if the device has been lost see section 6 below.
From the Main Menu display select  Radio Devices 
Press the  key to select  Delete Device 
The display will prompt you to "Trigger the
Activate the device to be deleted.
The display will show the device type and it's 8 digit ID number.
If this is the device you activated press the  key to select
If it's NOT the device you activated press the ENTER key to select
To exit the mode select  Exit 
6. MANUAL ADD/EDIT RADIO DEVICES
If there is a lot of radio activity making it difficult to learn radio devices by activating them then they can be entered manually
using this mode. If a device has been lost and you need to remove it from memory you should also use this mode.
From the Main Menu display select  Radio Devices 
Press the  key to select  Add/Edit Device 
The display will show;
To Add a New Device
Use the   keys to select the next available free Slot Number. This is identified by the ID being
 Id : ????????
displayed as
Press the ENTER key then enter the 8 digit ID off the label on the device to be added. Use the  keys to select each digit
(0‐9) and use the   keys to move between digits then press the ENTER key.
 Exit 
To exit the mode select
To Edit or Delete a Device
Use the   keys to select the required Slot Number/Id.
To Edit; press the ENTER key then edit the 8 digit ID (as described above) to match the label on the device.
To Delete; press the ENTER key then use the  keys to set the first digit to a "?" then press the ENTER key.
The ID will then be displayed as  Id : ????????
 Exit 
To exit the mode select
Doc No. FM0548 issue B Page 6
and press the ENTER key.
Radio Devices
Learn Device
 Delete Device
Add/Edit Device
Sensor".
Delete Device
Trigger Sensor :)
 Exit
then press the ENTER key.
and press the ENTER key.
Radio Devices
Learn Device
Delete Device
 Add/Edit Device
Add/Edit Device  
Slot : 01
 Id : 20044216
Exit
.
then press the ENTER key.
.
then press the ENTER key.
and press the ENTER key.


)

 Delete 
then press ENTER.
 Reject 
then try again.
and press the ENTER key.


