Getting Started; Fitting Batteries; Switching The Gauge On And Off; The Keypad - Elcometer 224 Operating Instructions Manual

Digital profile gauge, standard

Hide thumbs Also See for 224:

Table of Contents

2 GETTING STARTED

Before you use your gauge for the first time, remove the paper strip from the battery compartment.

Batteries are located under the cover at the rear of the gauge. Use two LR03 (AAA),

alkaline dry batteries, or rechargeable equivalent; take care to ensure correct battery

polarity.

To switch your gauge on, press

The gauge switches off automatically after 60 seconds; to switch off manually, press and

hold

The gauge is controlled by four 'softkeys'.

The function of these softkeys varies and is described by symbols and words on the

bottom line of the screen.

An interface is located on the side of your gauge. This interface is to download welcome

screens using an optional RS232 connecting cable - see "Personalised welcome

screen" on page 16.

Table of Contents