General Information; The Manual - Siemens SITRANS LR 400 Instruction Manual

General Information

The Manual

Refer to this manual for proper installation, operation and maintenance of the SITRANS
LR 400 Radar Level Instrument.
Special attention must be paid to warnings and notices that are highlighted from the rest
of the text by grey boxes.
Warning
means that failure to observe the necessary precautions can result in death,
serious injury and/or considerable material damage.
Note
means important information about the actual product or that part of the
operating manual to which particular attention should be paid.
• These instructions do not claim to cover all details or variations in equipment, not to
provide for every possible contingency that may arise during installation, operation,
or maintenance.
• For further information or to resolve issues not covered in the manual, consult your
Siemens Milltronics representative.
• The contents of the manual shall not become part of or modify any prior or existing
agreement, commitment or relationship. The Sales Contract contains the entire
obligation of Siemens. The warranty contained in the contract between the parties
is the sole warranty of Siemens Milltronics.
Note:
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
WARNING:
Changes or modifications not expressly approved by Siemens Milltronics
could void the user's authority to operate the equipment.
IMPORTANT: All specifications are subject to change without notice.
Please ensure that any safety-related information is confirmed with a
qualified Siemens Milltronics representative.
7ML19985FH01 SITRANS LR 400 – INSTRUCTION MANUAL DRAFT Page 1