Installing The Radio; Selecting The Mounting Position - Tait TM9155R Installation Manual

4

Installing the Radio

This section explains how to install and check the radio and its associated
equipment. It contains the following information:
4.1

Selecting the Mounting Position

Inspect the vehicle and determine the safest and most convenient position
for mounting the radio. Tait recommends the use of an equipment
mounting tray designed for the vehicle. These are available from
manufacturers such as Havis-Shields (www.havis.com), Jotto Desk
(www.jottodesk.com), Gamber Johnson (www.gamberjohnson.com), and
Stewart Products (www.stewartproducts.com).
Make sure that there is sufficient clearance for the heatsink and for the
cables. Check cable lengths.
Important
12 Installing the Radio
Selecting the Mounting Position
Installing the Antenna
Connecting the Power Cable to the Power Source
Installing the Remote Control Head
Installing the Microphone
Connecting to the Ignition Signal
Connecting a Remote Speaker
Connecting to an Emergency Switch and/or External Alert Devices
Mounting the Radio
Checking the Installation
Do not mount the radio in areas where it can be sprayed by
a high-pressure cleaning device or temporarily submerged
from an accumulation of water or other liquids.
TM9100 Mobiles: 110 W Mobile Installation Guide
© Tait Electronics Limited October 2005