HomeMatic HM-CC-TC Installation And Operating Manual page 5

Radio-controlled

Hide thumbs Also See for HM-CC-TC:

Table of Contents

Available languages

The room thermostat transfers commands to the actuator

mounted on the heater in a cyclic time pattern with a cycle

time between 120 and 184 seconds. The actuator conﬁrms the

transferred radio command and controls the heat transfer feed

accordingly.

Deﬁning a preset temperature or managing the time program

in the room thermostats can also be done comfortably with

a graphic interface for making temperature changes with the

HomeMatic center. Controlling continues to be performed self-

sufﬁciently by the room thermostat in the respective room.

Teaching one or more shutter contacts or window rotary handle

sensors to the room thermostat, the window position (open/

closed) can be evaluated and integrated into the control algo-

rithm.

(A)

Setting dial (for data entry)

(B)

Device LED

(C)

Display

(D)

Control buttons (Menu, OK, Day-/Night switch)

(E)

Wall holder mount

(F)

Battery compartment

(G)

Wall holder

Table of Contents

Need help?

Do you have a question about the HM-CC-TC and is the answer not in the manual?