Settings For Automatic Mode "Prg - HomeMatic HM-CC-TC Installation And Operating Manual

Radio-controlled

Hide thumbs Also See for HM-CC-TC:

Table of Contents

Available languages

8.1

Settings for automatic mode "PRG"

The time for automatically switching between the various tem-

perature phases can be changed separately for each weekday,

which enables the adapation to personal lifestyles.

When setting the individual phases, the starting time for the

respective temperature phase is always shown in the top line

of the left-hand margin and indicates the previous temperature

phase automatically with the end time.

You can deﬁne up to 24 time phases per day.

Call up special function "PRG".

Press the "OK" button to make the time program settings.

Type of time program:

Use the setting dial to select the day or the days for which the

time program should be changed. The following options are pos-

sible:

Conﬁrm your entry with OK.

Time phase

The display for the ﬁrst temperature phase time appears. The

starting time, which cannot be changed, is shown in the top line

and the variable end time for ending the ﬁrst temperature phase

is shown in the bottom line:

Table of Contents

Do you have a question about the HM-CC-TC and is the answer not in the manual?