Saving An Individual Sequence - Akai MPC 4000 Reference Manual

Save mode
If an identically-named file already exists in the save-destination folder, the File Exists
popup window will appear.
A [F1] key (CANCEL)
Cancels the operation and closes the popup window.
B [F3] key (RENAME)
Changes the file name and saves the file.
C [F5] key (REPLACE)
Overwrites the file (i.e., the existing file will be lost).
Either press the [F3] key (RENAME) to change the name of the file, or press the [F5] key
(REPLACE) to overwrite the existing file.

Saving an individual sequence

Here's how to save an individual sequence from memory to a storage device.
1. In the Save page, move the cursor to the Type field and turn the [JOG] dial to
select SAVE SEQUENCE.
The data list block will change to a display like the following.
A Sequence list field
Lists the sequences that are in memory.
B MIDI file type field
Selects the type of file that will be saved; either 0 (SMF format 0) or 1 (SMF format 1).
C Size field
Indicates the size of the sequence.
2. Move the cursor to the Disk field and turn the [JOG] dial to open the Disk List
popup window.
3. Move the cursor to the storage device on which you want to save the data, and
press the [F6] key (SELECT).
That storage device will be selected as the save-destination, and the popup window will
close.
88
1 2
1
3
2
3