Table of Contents
Advertisement
6.
Use a metal rod or similar object as a prop inside the chassis to hold up the top
panel.
• The side panels and screws you removed must be kept in a safe place.
• To close the top panel, re-tighten the screws in the opposite order to which they were
removed.
Installing a drive
1.
If you are installing a removable-media drive such as a CD-ROM drive or Zip
drive, remove the blank panel from the front panel.
2.
Detach the bracket that is attached to the bottom panel of the chassis.
3.
Use the hard disk attachment screws (included with the MPC4000) to attach
the drive to the bracket, and re-attach the bracket to the bottom panel of the
chassis.
When installing a drive in the 3.5 inch bay
PC IO AD_DA
P7
P8
P2
PC IO
PC CPU
Installing a drive
253
Hide quick links:
Advertisement
Table of Contents
