Sequence edit mode
Graph display
This block will be displayed if you select other than note events (i.e., control changes or
pitch bend, etc.) in the View field for a DRUM or INST type track.
A Graph display
Displays the continuously-variable events recorded in the track. The horizontal dimen-
sion is the time axis, and the vertical dimension is the value of the continuously-variable
event.
B Time ruler
Displays the time axis of the track. The markings in the ruler are the minimum units by
which you can select a region.
C Marker
This is used to indicate the current location or to select continuously-variable events.
To extend the selected region, hold down the [SHIFT] key and use the CURSOR [
keys.
Event list display
When the cursor is located in the graphic editor, you can press the [WINDOW] key to
view an event list containing only the currently selected events.
A Event list block
Displays the events included in the selected region.
To delete an event, use the cursor to select a MIDI event and then press the [F4] key
(DELETE).
To select multiple events, hold down the [SHIFT] key and use the CURSOR [
keys (or turn the [JOG] dial).
To return to the previous block display, press the [F1] key (CLOSE).
View block
This area selects the type of MIDI events displayed in the graphic editor.
40
2
3
1
1
1
]/[
]
√
®
]/[
]
π
†
2