Using Commands To Edit A Sample - Akai MPC 4000 Reference Manual

The Keep or Retry popup window will appear.
5. Use the [F3] key (P
®
sample with the edited result.
6. If you are satisfied with the edited result, assign a new name to the sample as
necessary, and press either the [F2] key, [F5] key, or [F6] key to save the edited
data as a new sample.
However if you press the [F2] key (OVER WR), the new sample name will be ignored
and the edited data will be written over the original file.

Using commands to edit a sample

You can use the editing commands of Sample mode to edit a sample in various ways.
1. In the Trim/Loop page or the Region page, use the Sample field to select a
sample, and press the [EDIT] key.
The Sample Edit popup window will appear.
1
2
A Edit field
Selects the editing command.
B Parameters
These items will depend on the command you selected.
C [F1] key (CANCEL)
Cancels the editing operation and closes the popup window.
D [F6] key (DO IT)
Executes the editing command.
2. Move the cursor to the Edit field, select the desired editing command, and set
the parameters as necessary.
For the available commands and their parameters, refer to the section that follows.
3. To execute the sample editing command, press the [DO IT] key.
ORIGIN) and [F4] key (P
3
Region page
NEW) to compare the original
®
4
183