The Q-Link Function; Q-Link Setup Page; Assigning Parameters To The Q-Link Knobs/Sliders - Akai MPC 4000 Reference Manual

The Q-LINK function

Q-LINK setup page

Assigning parameters to the Q-LINK knobs/sliders

Here you can assign MPC4000 internal parameters to the knobs and sliders of the
Q-LINK section.
To access this page ....... Q-LINK section [SETUP] key → [F1] key (KNOB)
1
2
A Multi block
B Destination block
Functions
• [F1] key (KNOB)
Displays the Q-LINK Setup page in which you can assign parameters to knobs.
• [F2] key (SLIDER)
Displays the Q-LINK Setup page in which you can assign parameters to sliders.
• [F5] key (RES ALL)
Resets all parameters being controlled by Q-LINK to their original values.
• [F6] key (RESET)
Resets the currently selected parameter being controlled by Q-LINK to its original value.
Multi block
A Multi field
Selects the multi for which you will make Q-LINK settings.
Hint: Q-LINK knob and slider settings are stored in the multi. If you want to keep your settings, you
must save the multi from internal memory onto an external storage device.
(to assign a parameter to a knob)
Q-LINK section [SETUP] key → [F2] key (SLIDER)
(to assign a parameter to a slider)
1
2
1
Q-LINK setup page
229