Akai MPC 4000 Reference Manual page 152

DELAY>STEREO
This is a stereo delay in which left and right channels can be set independently.
Parameter Range
LDelay
1ms–1500ms
Feedback
0–127
HFdamp
20Hz–20kHz
RDelay 1ms–1500ms
Feedback
0–127
HFdamp
20Hz–20kHz
Wet/Dry
100/0–0/100
Effect
ON/OFF
DELAY>XOVER (Delay > Crossover)
This is a variation of a stereo delay. The difference is that the feedback of the L and R
channels is returned to the opposite channel.
Parameter Range
LDelay
1ms–1500ms
Feedback
0–127
HFdamp
20Hz–20kHz
RDelay
1ms–1500ms
Width
0–127
Wet/Dry 100/0–0/100
Effect ON/OFF
DIGITAL EQ
This is a three-band parametric EQ.
Parameter Range
1 Frequency
20Hz–20kHz
Gain –18dB–+18dB
Q
0.5–10
2 Frequency 20Hz–20kHz
Gain
–18dB–+18dB
Q
0.5–10
3 Frequency
20Hz–20kHz
Gain
–18dB–+18dB
Q
0.5–10
Output
–60dB–+24dB
Wet/Dry
100/0–0/100
Effect
ON/OFF
Function
Adjusts the L channel delay time.
Adjusts the amount of feedback for the L channel delay.
Adjusts the frequency at which the high-frequency range of the
L channel feedback sound will be cut.
Adjusts the R channel delay time.
Adjusts the amount of feedback for the R channel delay.
Adjusts the frequency at which the high-frequency range of the
R channel feedback sound will be cut.
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Switches the effect on/off.
Function
Adjusts the L channel delay time.
Adjusts the amount of feedback for the L and R channel delay.
Adjusts the frequency at which the high-frequency range of the
L and R channel feedback sound will be cut.
Adjusts the R channel delay time.
Adjusts the stereo spread.
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Switches the effect on/off.
Function
Adjusts the center frequency of EQ1.
Adjusts the gain of EQ1.
Specifies the Q of EQ1.
Adjusts the center frequency of EQ2.
Adjusts the gain of EQ2.
Specifies the Q of EQ2.
Adjusts the center frequency of EQ3.
Adjusts the gain of EQ3.
Specifies the Q of EQ3.
Adjusts the output level of the effect sound.
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Switches the effect on/off.
Edit page
143