Making Program Modulation Settings - Akai MPC 4000 Reference Manual

Program mode

Making program modulation settings

Here's how to specify the modulation source, modulation destination, and modulation
depth for each of the 64 modulation routings of a program.
1. In the List page, move the cursor to any one of the Lvl/Pan/Out/FX/Send fields,
and press the [WINDOW] key.
The Program Modulation popup window will appear.
A Mod field
Indicates the modulation number (1–64).
B Source field
Selects the modulation source (modulation wheel, filter envelope, velocity, LFO1, LFO2,
etc.).
C Destination field
Selects the modulation destination parameter (amplitude, pan, pitch, etc.)
D Note/Kg field
Selects the key group or note number whose modulation depth you want to set. By select-
ing ALL you can set the depth for all key groups or note numbers at once.
E Depth field
Specifies the modulation depth.
F [F1] key (CLOSE)
Updates the settings and closes the popup window.
Hint: The Program Modulation popup window can also be accessed from the key group mix Pitch,
Edit 1, Edit 2, or Zone pages. For the fields that will appear when you open the popup window, refer
to the explanations in each page.
2. Move the cursor to the Mod field, and turn the [JOG] dial to select a
modulation number.
3. Move the cursor to the Source field, and turn the [JOG] dial to select one of the
following modulation sources.
MODWHEEL, BEND UP, BEND DOWN, AFT TOUCH, VELOCITY, OFF VELO,
KEYBORD, LFO1, LFO2, AMP ENV, FILT ENV, AUX ENV, CONTROLLER: (lets
204
1 2 3 4 5
6