Fig. 7: Base Fastener; Fig. 8: Placing The Door Lock Drive - HomeMatic HM-Sec-Key Mounting Instruction And Operating Manual

Mounting
A
C
Fig. 7: Base fastener
These two screws will damage the door leaf or the door fittings however. For
those living in rented accommodation, this could lead to a landlord making
claim for compensation or holding back a tenant's deposit.
• Insert the key into the lock cylinder, unlock the lock and turn the key to neutral posi-
H
tion (where it can be pulled out).
• Guide the door lock drive over the key; push it completely onto the base fastener.
Fasten the door lock drive with the two Allen screws (M3 x 14 mm) that were
screwed out in the beginning of the procedure. Screw the Allen screws in completely
using the supplied Allen key; careful not to turn too tight.
J
K
Fig. 8: Placing the door lock drive
36
K
H
B
A
J
D
E
F
G
I
G
I
A
K