Dhcp - Intercel Ultra SAM4W User Manual

Ultra SAM4W User Guide V1.3

5.7.2 DHCP

The DHCP protocol (Dynamic Host Configuration Protocol) is a communication protocol that makes automatic
assignment of IP addresses in an organization's network. This page allows users to configure the DHCP range and lease
time. By default, the first PC connected to your UltraSAM4W modem will be assigned 192.168.1.100 as an IP address,
the second PC will obtain 192.168.1.101, etc.
DHCP Status
DHCP Start Range
DHCP End Range
DHCP Lease Time
DHCP Relay
DHCP Server Address
Address Reservation List
DHCP lease time specifies the time period during which a given IP address will be valid.
23
DHCP setting status (Enable / Disable)
DHCP allocated IP address (Start Range)
DHCP allocated IP address (End Range)
Time period for the address is leased
DHCP Relay status (Enable / Disable)
DHCP server IP address
Administrator can reserve IP address for dedicate PC device
Information could be Clone from Dynamic DHCP Client List
Ver1.3