Web Interface - Intercel Ultra SAM4W User Manual

Ultra SAM4W User Guide V1.3

5 Web Interface

The UltraSAM4W is configured through its web interface. To launch the web interface, connect the UltraSAM4W
modem to a PC with the supplied Ethernet cable.
Web interface could be accessed by browsing the webpage with IP address 192.168.1.1
On your PC, the configuration of the "connection to the local network" must be checked so that it has a good IP
Address:

Either the PC gets the IP address automatically from the UltraSAM4W modem (DHCP).

Or set the IP address to 192.168.1.X where X is from 2 to 253.
Suggested Web Browser for the configuration of the UltraSAM4W are as follow: Internet Explorer 8.0 or later, Mozilla
Firefox 22.0 or later.
Open a web browser. Power on the module, wait until the IP address of the PC is well distributed by the UltraSAM4W
modem, then type in the address bar 192.168.1.1, which is the default IP address of the modem. You will be
forwarded to login page for entering Username and Password. By default, the Username and Password are both
"admin". They could be changed through the web interface later.
12 Ver1.3