Login User Interface; Logout User Interface - Intercel Ultra SAM4W User Manual

Ultra SAM4W User Guide V1.3

5.1 Login User Interface

User can access UltraSAM4W configuration menu by login web browser system.
Please follows below instructions for the access
1. Open web browser and navigate address
2. Enter username and password
3. Click Submit to login.
Two default user accounts are preset in the system: Root Account and Admin Account
Root Account
Username root
Password root
Admin Account
Username admin
Password admin
Root Account allows full control and access to all settings.
Admin Account allows lower level of authorization on the configuration.
Only Root Account allows firmware upgrade, configuration backup, restoring and factory reset function.
Once the Username and Password are confirmed, the status page of the web interface with basic information of the
LAN and WAN connection will show up.

5.2 Logout User Interface

For security reasons, make sure to logout from the web interface after configuring the UltraSAM4W modem by clicking
Logout on the top manual bar.
After a successful logout, the system will re-direct to Login Menu.
13
http://192.168.1.1
Ver1.3