Front Panel Controls; Source Selection - T+A MP 3100 HV User Manual

All the important functions of the MP 3100 HV can be controlled using the buttons and rotary knobs on the front panel.
The large rotary knobs are used for navigation in lists and menus and to select the listening source. Functions which are
needed less frequently are controlled using a menu which is called up by pressing the  button.
All information relating to the machine's state, the current track and the associated transmitting station are displayed on
the integral screen. The following section explains the functions of the buttons on the machine, and the information
provided on the screen.
 On / Off switch



 Source selection
SOURCE
 CD drawer
10

Front panel controls


Touching the button briefly switches the device on and off.
 
The button remains dimly lit even in stand-by mode, to indicate that the
MP 3100 HV is ready for use.

Caution!


The button is not an isolation switch. Certain parts of the machine remain
connected to mains voltage even when the screen is switched off and dark. If you
know you will not be using the machine for a long period, we recommend that you
disconnect it from the mains by withdrawing the mains plugs from the wall socket.
The desired listening source is selected by turning this rotary knob; your
chosen source then appears on the screen. After a short delay the machine
switches to the appropriate source.
The CD drawer is located below the display. Please insert the disc with the
label side facing upwards into the appropriate depression of the tray.
The drawer is opened and closed by touching the
on the source selection knob (SOURCE).

button or by a long press