Selecting the disc player as
source
Inserting a CD
Front panel display
36
Operating the DISC player
First choose DISC as listening source by opening the source selection menu on
the FD100 remote by pressing the -button or by turning the SOURCE-
Knob on the front panel of the MP 3100 HV.
Open the CD drawer ( on the front panel / FD100)
Place the disc centrally in the appropriate depression in the drawer, with the
side to be played facing down.
Close the CD drawer (on the front panel / FD100)
When you close the drawer, the machine immediately reads the CD's 'Table of
Contents'; the screen displays the message 'Reading'. During this period all
button-presses are ignored.
The screen then displays the total number of tracks on the CD in the drawer,
e.g.: '13 Tracks
60:27'.
It is also shows the current mode of operation, e.g.
In disc mode the MP 3100 HV can be switched to either of two different screen
displays with a long press on the button:
Large-format display:
Enlarged display of the most important information, clearly legible even from
a distance
Detail display:
Small-text display showing a large number of additional information points,
e.g. bit-rate etc.
Fig.
Large format display
Fig.
Detail display