Operating Music Services; General Information; Selecting A Music Service; Playback - T+A MP 3100 HV User Manual

General information

Selecting a music service

Playback

30

Operating music services

The MP 3100 HV supports playback of music services such as TIDAL.
To make use of music services you may need to take out a paid subscription
with the appropriate provider.
Use of music services requires the input of access data (username and
password. These access data can be stored separately for each provider in the
"Music services" menu within the System Configuration menu (see the section
entitled "Basic settings of the MP 3100 HV").

Future music services and others which are not currently supported may be
added subsequently by updates to the firmware of the MP 3100 HV.
First choose Internet as listening source by opening the source selection menu
on the FD100 remote by pressing the -button or by turning the
SOURCE-Knob on the front panel of the MP 3100 HV.
Once the source Internet is set, a list appears which contains all the available
music services as well as Internetradio. To select a service, use the  /
 buttons to navigate to the appropriate line. Pressing the  button
opens the Select list for the corresponding service.

If the list of the selected service does not open when you press the 
button, this may mean that the access data is not stored or is incorrect (see the
section entitled "Basic settings of the MP 3100 HV / Music services").
The music content to be played is selected with the help of Select lists. These
lists are controlled using the navigation buttons (cursor buttons) on the remote
control handset or by the SELECT knob on the machine's front panel.
Use the  /  buttons to select the desired entry from the list.
a)
A brief press selects the previous / next entry within the list. The scrolling
speed can be increased by holding the button pressed.
The list entry you choose is now displayed in enlarged form.
Press the  or  button to open or start the list entry shown in
enlarged form.
Pressing the  button returns you to the previous folder level.
b) Indicates the currently selected point within the opened list.