Back Panel Connections - T+A MP 3100 HV User Manual

BALANCED
ANALOG
OUT
UN-
BALANCED
HLINK
USB HDD
(Host mode)
LAN
WLAN
46

Back panel connections

The symmetrical XLR output delivers analogue stereo signals with a fixed level.
It can be connected to the CD-input (line input) of any stereo pre-amplifier,
integrated amplifier or receiver.

If both types of connection are present on the connected amplifier, we
recommend the symmetrical option to obtain the best possible sound quality.
The unbalanced RCA output of the MP 3100 HV delivers analogue stereo
signals with a fixed level. It can be connected to the CD-input (line input) of any
stereo pre-amplifier, integrated amplifier or receiver.
Control input / output for  H
Both sockets are equivalent – one is used as input, the other one serves as
output towards other H
Socket for a USB memory stick or external hard discs
The storage medium can be formatted with the FAT16, FAT32, NTFS, ext2,
ext3 or ext4 file system.

The USB storage medium can be powered directly via the USB port provided
that its current drain is in accordance with the USB norm. Normalised 2.5" USB
hard discs can be connected directly, i.e. without a separate mains PSU.
Socket for connection to a wired LAN (Ethernet) home network.

If a LAN cable is connected this will have priority over wireless WLAN net-
works. The WLAN module of the MP 3100 HV will automatically be disabled.
Input socket for WLAN antenna

Automatic activation of the WLAN module
After powering on the MP 3100 HV detects if it is connected to a wired LAN
Network. If no wired LAN connection is found, the MP 3100 HV will
automatically activate its WLAN module and it will try to get access to your
WLAN network.

The aerial should be set up free-standing using the magnetic base supplied in
the set; this ensures maximum possible range. Please refer the wiring diagram
in Appendix A.
– systems:
LINK
devices.
LINK