T+A MP 3100 HV User Manual page 4

About these instructions
All the controls and functions of the MP 3100 HV which are frequently used are described in the first section of these
operating instructions.
The second part 'Basic settings, Installation, Using the system for the first time' covers connections and settings
which are very seldom required; they are generally required only when the machine is set up and used for the first time.
Here you will also find a detailed description of the network settings required for connecting the MP 3100 HV to your
home network.
Symbols used in these instructions
Caution!

Text passages marked with this symbol contain important information which must be observed if the machine
is to operate safely and without problems.

This symbol marks text passages which provide supplementary notes and background information; they are
intended to help the user understand how to get the best out of the machine.
Notes on software updates
Many features of the MP 3100 HV are software based. Updates and new features will be made available from time to
time. The update process takes only a few minutes. See the chapter entitled "Software update" for how to update your
device via the internet connection.
We recommend you to check for updates before using your MP 3100 HV for the first time. To keep your device up to
date you should check for updates from time to time.
IMPORTANT! CAUTION!
This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or
attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution labels appear on your device:
Rear Panel:
CLASS 1
LASER PRODUCT

The operation instructions, the connection guidance and the safety notes are for your own good -
please read them carefully and observe them at all times. The operating instructions are an integral
part of this device. If you ever transfer the product to a new owner please be sure to pass them on to
the purchaser to guard against incorrect operation and possible hazards.

All the components we use meet the German and European safety norms and standards which are
currently valid. This product complies with the EU directives 2014/35/EC, 2014/30/EC, 2009/125/EC,
2011/65/EC + 2015/863, 1999/5/EC and 2012/19/EC..
4