Selecting the CD player as
source
Inserting a CD
Front panel display
36
Operating the Disc player
First select the Disc Player as source, either using the button on the
SRC1 or by repeatedly pressing one of the buttons on the front panel of
the MP 2500 R.
Open the CD drawer ( on the front panel / SRC1)
Place the disc centrally in the appropriate depression in the drawer, with the
side to be played facing down.
Close the CD drawer (on the front panel / SRC1)
When you close the drawer, the machine immediately reads the CD's 'Table of
Contents'; the screen displays the message 'Reading'. During this period all
button-presses are ignored.
The screen then displays the total number of tracks on the CD in the drawer,
e.g.: '13 Tracks
60:27'.
It is also shows the current mode of operation, e.g.
In CD mode the MP 2500 R can be switched to either of two different screen
displays with a long press on the button:
Large-format display:
Enlarged display of the most important information, clearly legible even from
a distance
Detail display:
Small-text display showing a large number of additional information points,
e.g. bit-rate etc.
Fig.
Large format display
Fig.
Detail display