Speakers; Movie Mode; Music Mode - T+A SADV 1245 R User Manual

In this menu you can adjust speaker sizes, delays and
the volume level for each speaker channel. These
adjustments help to optimize the response of your
system.
Front Size / Centre Size / Surround Size
Off Choose this setting, if no speakers are connected
to the channel
Large Choose this setting for all speaker outputs which
are connected to large speakres, capable of
reproducing frequencies below 50 Hz.
Small Setting for speaker outputs connected to small
(satellite) speakers.
With the help of this submenu you can adjust the volume
for each speaker channel to acheive equal volume for all
channels at your listening position.
This menu is used to adjust the volume of each speaker
channel for SACD playback.
Menu Speakers
Note:
These settings have no effect for SACD playback, if in
menu 'Setup /Audio Menu' 'SACD output' = 'ON' is
selected.
The speaker settings only influence the signals of the
analogue multichannel output of the SADV 1245 R. They
have no effect for the digital output signals.
Subwoofer
On if a subwoofer is present in the system
Off if no subwoofer is present in the system (in this
case at least the front channels require large

speakers).

Front Dist./ Centre Dist. / Rear Dist.
Adjust these settings according to the speaker distances
from your listening position.
Menu Movie Mode
Menu Music Mode
33