Installation - Monoprice Blackbird User Manual

INSTALLATION

Perform the following steps to install this switch.
1. Ensure that all equipment to be connected is powered off and unplugged from its
power source.
2. Using a High Speed HDMI® Cable (not included), plug one end into the HDMI input
on your display, then plug the other end into the HDMI port in the OUTPUT section
on the scaler/switcher.
3. Using the included audio cable, plug one end into the 3.5mm AUDIO jack in the
OUTPUT section, then plug the other end into the inputs of powered speakers, a
stereo amplifier, or other analog audio device.
10