Advertisement
INSTALLATION
Perform the following steps to install this KVM switch.
1. Plug a USB mouse, USB keyboard, DisplayPort® monitor,
microphone, and headphones/speakers into the Console Ports on
the KVM switch.
Note: If you want to connect additional USB peripherals to use with the
two computers, plug a USB hub (not included) into one of the USB ports
on the switch, then plug the keyboard, mouse, and other USB peripherals
into the USB hub.
2. Plug one set of the USB cable, DisplayPort cable, and audio cables
into the first computer, then do the same for the second computer.
3. (Optional) If the connected computers cannot provide sufficient
power through the USB bus, plug one end of a micro USB cable (not
included) into the Micro USB Power Port on the switch, then plug
the other end into a USB power source, such as a wall charger or
powered USB hub.
5
Advertisement
