Resolution Submenu
The Resolution submenu allows you to set the
output resolution of the switch to a fixed
value. You can also select the AUTO option,
which automatically sets the output resolution
to the best resolution for the connected
display. The Resolution sub menu is also
accessible by pressing the RES button on the
included remote control.
RS232 CONTROL
In addition to control using the front panel controls and the included remote control, you
can control the switch using a third party RS232 control software. The communications
parameters for RS232 are:
Baud Rate:
Data Bits:
Stop Bits:
Parity:
The switch responds to the following commands.
115200
8
1
None
15