Installation - Monoprice 36651 User Manual

INSTALLATION

1. Power off and disconnect from its power source each device that will be
connected to the switch.
2. Using a High Speed HDMI® Cable (not included), plug one end into the input on
your monitor, then plug the other end into Sink HDMI port on the rear panel.
3. Plug a USB keyboard into the USB Keyboard Port on the front panel.
4. Plug a USB mouse into the USB Mouse Port on the front panel.
5. (Optional) Plug a pair of speakers or a headset into the Audio Out jack on the
front panel.
6. (Optional) Plug a microphone with a 3.5mm plug into the MIC jack on the front
panel.
7. (Optional) Plug a USB hub or USB device into the USB Port on the front panel.
8. Using a High Speed HDMI® Cable (not included), plug one end into PC1 HDMI
port on the rear panel, then plug the other end into the HDMI video output on
your first computer.
Note: In order for the switching function to work, the first connection must be to a
computer. The other connections can be to computers, consoles, Blu-ray Disc™ players,
or other devices with HDMI® video output.
9. Using a USB Type-A to Type-B cable (not included), plug the Type-B end into the
PC1 USB port on the rear panel, then plug the Type-A end into a USB port on
your first computer.
10. Using a High Speed HDMI® Cable (not included), plug one end into PC2 HDMI
port on the rear panel, then plug the other end into the HDMI video output on
your second computer, console, or other device with HDMI video output.
11. (Optional) If connecting to a second computer or console, plug the Type-B end
of a USB Type-A to Type-B cable (not included) into the PC2 USB port on the rear
panel, then plug the Type-A end into a USB port on your computer or console.
Note: In addition to their regular controllers, the PlayStation® 4 and Xbox One™
consoles can accept input from a standard PC USB keyboard and USB mouse.
12. Repeat steps 9-11 above for the other two connections.
5