Installation In Multiple Combinations - HomeMatic HM-PB-2-WM55-2 Installation And Operating Manual

• If you are working with a stone wall, drill the mar-
ked two 5 mm holes and insert the plugs supplied.
If you are working with a wooden wall, you can
pre-drill 1.5 mm holes to make screws easier to
insert.
• Use the screws and plugs supplied to fasten the
mounting plate to the wall.
• Next, attach the frame to the mounting plate.
• Attach the push button. Make sure that the arrows
on the back side point upwards and that the clips
on the mounting plate latch into the openings on
the electronic unit.

6.4 Installation in multiple combinations

You can mount the push button with the attachment
frame provided or use it with frames of other manuf-
acturers as well as integrate the electronic unit into a
multi-gang frame. In both cases, mounting with adhe-
sive strips and screws is possible. For mounting with
multiple combinations, make sure that the mounting
plate of the push button is seamlessly aligned to the
already fixed mounting plate/retaining ring.
The Homematic push button is designed to fit into
frames supplied by the following manufacturers:
33