Location Errors; Configuration Errors; Device Failure Errors - HP integrity superdome x Service Manual

To correct a cooling error, do the following:
Procedure
1. Use the arrow buttons to navigate to Fix This, and then press OK.
2. Review and complete the corrective action suggested by the Insight Display. In most cases, you must
either add fans to the enclosure, correct the fan configuration, or remove the indicated components.

Location errors

Location (installation) errors occur when the component is not installed in the appropriate bay. Location
errors can occur on server blades, power supplies, and fans. Integrity Superdome X systems are
configured such that these errors should not occur unless the components have been moved.
To correct a location error, do the following:
Procedure
1. Use the arrow buttons to navigate to Fix This, and then press OK.
2. Review and complete the corrective action suggested by the Insight Display. Remove the indicated
component, and then install it into the correct bay. The Insight Display will indicate the correct bay
number.

Configuration errors

Configuration errors can occur if the interconnect modules are installed in the wrong bays or if mezzanine
cards are installed in the wrong connectors in the server blade. Configuration errors can occur on server
blades and interconnect modules. Integrity Superdome X systems are configured such that these errors
should not occur unless the components have been moved.
To correct a configuration error, do the following:
Procedure
1. Use the arrow buttons to navigate to Fix This, and then press OK.
2. Review and complete the corrective action suggested by the Insight Display. Depending on the error
received, do one of the following:
• Remove the indicated interconnect module and then install it into the correct bay (the Insight
Display indicates the correct bay).
• Remove the server blade to correct the mezzanine card installation (the Insight Display will indicate
the correct bay). For information on installing the mezzanine card, see the server-specific user
guide on the Documentation CD.

Device failure errors

Device failure errors occur when a component has failed. Device failure errors can occur on all
components, including the following:
• Server blades
• Power supplies
• Interconnect modules
• OA modules
• Fans
• ac power inputs
To correct a device failure error, do the following:
120 Location errors