Troubleshooting Partitions - HP integrity superdome x Service Manual

Interconnect module
10 GB Ethernet Pass-Thru
Brocade 16Gb SAN switch
4X FDR Infiniband Switch

Troubleshooting partitions

Cause
Use the following commands to troubleshoot partitions:
• Use the OA parstatus command to determine which resources belong to the failing nPar.
• Use the HR> show indict and show deconfig commands to determine if any of the resources
belonging to the nPar are deconfigured, indicted, or in any failure state.
If any issues are reported, use the show CAE command for more information.
• Use the show syslog OA 1 command to check the syslog file for the active OA. For example:
OA-CLI> show syslog oa 1
Mar 28 17:20:59
reportin
g the blade is powered off.
Mar 28 17:21:24
Mar 28 17:21:24
Mar 28 17:21:24
Mar 28 17:21:44
Mar 28 17:26:31
partition
permissions to the default behavior
Mar 28 17:28:53
completed
Mar 28 17:29:37
Mar 28 17:29:37
Mar 28 17:29:37
Mar 28 17:29:58
Mar 28 17:33:12
Administrator
Mar 28 17:33:14
Administrator
Mar 28 17:33:16
Administrator
Mar 28 17:33:22
Administrator
Mar 28 17:33:24
Administrator
NOTE:
All partition-related messages in OA syslog contain the string parcon:.
See the HPE Integrity Superdome X and Superdome 2 Onboard Administrator Command Line Interface
User Guide for information on uploading and downloading partition specification files and runtime
92 Troubleshooting partitions
mgmt: Blade 8 has been allocated 1100 watts but iLO is
mgmt: Blade 1 Ambient thermal state is OK.
mgmt: Blade 3 Ambient thermal state is OK.
mgmt: Blade 5 Ambient thermal state is OK.
mgmt: Blade 7 Ambient thermal state is OK.
parcon: Note: Partition Controller has initialized all
parcon: Note: nPartition 2: Power On of nPartition
mgmt: Blade 2 Ambient thermal state is OK.
mgmt: Blade 4 Ambient thermal state is OK.
mgmt: Blade 6 Ambient thermal state is OK.
mgmt: Blade 8 Ambient thermal state is OK.
-cli: Administrator logged out of the Onboard
-cli: Administrator logged out of the Onboard
-cli: Administrator logged out of the Onboard
-cli: Administrator logged out of the Onboard
-cli: Administrator logged out of the Onboard
Firmware version
1.0.11.0
7.3.1a or later
3.4.0008