Menu - Dräger DrugTest 5000 Technical Manual

Use
3.9

Menu

The menu can be accessed by selecting the item Menu when the unit is ready to measure. Certain menu sections are only
accessible after entering a four-digit password.
The menu is navigated with three unit keys by selecting the associated functions in the display (softkeys).
3.9.1 Navigation in the menu
Graphic symbols facilitate navigating the menu levels:
back up to superior menu level
Closed folder:
This item contains further functions or sub-menus
Open folder:
The functions and sub-menus shown here are contained in this item
Function:
If selected, functions can be executed in a single step or several steps
Selection activated:
Functions which can be selected and activated are enabled by pressing the
3.9.2 Menu structure
According to the current configuration of the unit menu functions can be either restricted or available only after entering a
password.
Settings
Information
Datalogger
40
→
Language
→
Warning signal
→
Key sound
→
Type of keyboard
→
Time and date
→
Reset
Login
→
→
Versions
→
Unit statistics
Measurement
→
statistics
→
Measurement data
-key.
OK
Language selection
Switch warning signal on and off
Switch key sound on and off
Selection of keyboard type
Set time and date and select time and date format
Reset unit to default configuration at time of delivery
Create new operator or change password for an
existing operator
Hard- and software information
Display unit statistics
Statistics on tests conducted up to now
Display stored data sets
Dräger DrugTest 5000 Testsystem