Table of Contents
Advertisement
5.3
Display
Introduction
This screen briefly appears after turning on the control unit.
Search for drive
After the introduction the control unit attempts to establish a connection
with the drive unit.
Activation
Once the connection between the control unit and the drive is established,
the pneumatic system builds pressure and the motor shafts emerge. Once
the activation is terminated the display shows the main screen.
Main screen
This screen appears during the entire drive with the max-e. It shows the
charging state of the battery pack Œ and the control unit Ž, as well as the le-
vel of speed .
Should the display for the battery charge or for the control unit reach the lo-
west bar, the command "charge batteries" or "charge control unit" appears on
the screen, and you hear a signal tone. At this point you merely have a limit-
ed battery capacity at your disposal.
F
You must confirm this message by pressing the + key.
Lock brakes
Before the max-e automatically inserts the motor shafts when you turn off
the device, you must lock the brakes manually so that your wheelchair can-
not roll off.
F
Confirm that you locked the brakes by pressing the + key.
Tel 0044 1553 811977 Fax 0044 1553 811004 sales@manualhandlingsolutions.co.uk www.manualhandlingsolutions.com
max-e
AAT says Hello !
VERSION x.xx
e
max-
Seeking Drive
e
max-
Activating
Brakes
fixed?
NO
Manual Handling Solutions 58, Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ UK
20
2.5.6
Weather conditions
We recommend not to leave the max-e in freezing weather conditions for a
longer period of time to ensure that the device functions correctly.
2.6
Adjustment of the hand reste
The hand rest of the control unit can be adjusted to the user.
Loosen the screws Πon the bottom side of the control unit. The hand rest is
already equipped with several possibilities of attachment which allow you
to mount the hand rest in the most comfortable position for the individual
user.
YES
max-e
13
Advertisement
Table of Contents
