Specifications - Vertex Standard VXR-9000EV Service Manual

Specifications

General
Frequency Range:
Number of channel:
Channel Spacing:
Operating Voltage:
Current Drain:
Duty Cycle:
Frequency Stability:
Operating Temperature Range:
Dimensions (W x H x D):
Weight (Approx.):
Receiver
Antenna Impedance:
Antenna Connector:
Receiver Type:
Sensitivity:
Selectivity:
Intermodulation:
Image Rejection:
Squelch Threshold:
Audio Output:
Audio Distortion:
Hum and Noise:
Audio Frequency Response:
Conducted Spurious:
Transmitter
RF Output Power:
Antenna Impedance:
Antenna Connector:
Modulation Type:
System Deviation:
Hum and Noise:
Microphone Sensitivity:
Audio Frequency Response:
Spurious Emission:
Audio Distortion:
Microphone Impedance:
Specifications subject to change without notice or obligation.
A-1
Type A : 134 - 160 MHz, Type C : 146 - 174 MHz
32
5 kHz/6.25 kHz, 2.5 kHz/6.25 kHz
13.6 V DC ±10 %
8 A Maximum
Receive : 100 %
Transmit : 100 % (@20 W output)
1.5 ppm
1.0 ppm (30min after wake up)
–25 °C to +60 °C
483 x 88 x 343 mm
9.7 kg
50 ohm
Type-BNC
Double-Conversion Superheterodyne
0.25 µV (12dB SINAD), 0.35 µV (20dB Noise Quieting)
82 dB (Wide), 68 dB (Narrow)
72 dB (Wide), 63 dB (Narrow)
90 dB
0.4 µV (Adjustable)
4 W @4 ohm
< 3 %
>50 dB (Wide), >45 dB (Narrow)
De-emphasis : 6 dB/oct (From 300 Hz to 3 kHz)
<–80 dBm
25/10/5 W (High/Mid/Low)
50 ohm
Type-N
16K0F3E/11K0F3E
±5.0 kHz (Wide), ±2.5 kHz (Narrow)
>50 dB (Wide), >45 dB (Narrow)
5 mV
Pre-emphasis : 6dB/oct (From 300 Hz to 3 kHz)
–36 dBm @<1 GHz, –30 dBm @>1 GHz
3.0 % @1 kHz
600 ohm