Specifications - Vertex Standard VXR-9000 Service Manual

Specifications

General
Frequency Range:
Number of channel:
Channel Spacing:
Operating Voltage:
Current Drain:
Duty Cycle:
Frequency Stability:
Operating Temperature Range:
Dimensions (W x H x D):
Weight (Approx.):
Receiver
Antenna Impedance:
Antenna Connector:
Receiver Type:
Sensitivity:
Adjacent Channel Selectivity:
Intermodulation:
Image Rejection:
Squelch Threshold:
Audio Output:
Audio Distortion:
Hum and Noise:
Audio Frequency Response:
Conducted Spurious:
Transmitter
RF Output Power:
Antenna Impedance:
Antenna Connector:
Modulation Type:
System Deviation:
Hum and Noise:
Microphone Sensitivity:
Audio Frequency Response:
Spurious Emission:
Audio Distortion:
Microphone Impedance:
100 W PA Unit (Option)
Frequency Range:
Antenna Impedance:
Antenna Connector:
RF Output Power:
Duty Cycle:
Spurious Emission:
Operating Voltage:
Current Drain:
Operating Temperature Range:
Specifications subject to change without notice or obligation.
A-1
A : 400 - 430 MHz, D : 450 - 490 MHz
32
12.5 kHz/25 kHz*
* 25 kHz will not be available on new equipment in the U.S.A after 1/1/2013
13.6 V DC ±10 %
12 A Maximum
100 % (@25 W output)
1.5 ppm
1.0 ppm (30min after wake up)
–22 °F to +140 °F (–30 °C to +60 °C)
19 x 3-1/2 x 13-1/2 inch (483 x 88 x 343 mm)
21.4 lbs. (9.7 kg)
50 ohm
Type-BNC
Double-Conversion Superheterodyne
0.3 μV (12dB SINAD), 0.45 μV (20dB Noise Quieting)
80 dB (Wide), 75 dB (Narrow)
82 dB (Wide), 78 dB (Narrow)
90 dB
–5 dBμ
4 W @4 ohm
< 3 %
> 50 dB (Wide), > 45 dB (Narrow)
De-emphasis : 6 dB/oct (From 300 Hz to 3 kHz)
< –80 dBm
50/25/10 W (High/Mid/Low)
50 ohm
Type-N
16K0F3E/11K0F3E
±5.0 kHz (Wide), ±2.5 kHz (Narrow)
>46 dB (Wide), >43 dB (Narrow)
5 mV
Pre-emphasis : 6dB/oct (From 300 Hz to 3 kHz)
70 dB below carrier
<2.5 % @1 kHz
600 ohm
450 - 490 MHz
50 ohm
Type-N
100/75/50 W (High/Mid/Low)
100 % (@Cooling Fan "ON")
75 dB below carrier
13.6 V DC ±10 %
30 A Maximum
–22 °F to +140 °F (–30 °C to +60 °C)
VXR-9000 UHF Service Manual