Deleting Static Vsans - Cisco Nexus 5000 Series Configuration Manual

Configuring VSANs
Figure 20: VSAN Port Membership Details
• VSAN-based runtime (name server), zoning, and configuration (static routes) information is removed
• Configured VSAN interface information is removed when the VSAN is deleted.
The allowed VSAN list is not affected when a VSAN is deleted.
Note
Any commands for a nonconfigured VSAN are rejected. For example, if VSAN 10 is not configured in the
system, then a command request to move a port to VSAN 10 is rejected.

Deleting Static VSANs

To delete a VSAN and its various attributes, perform this task:
SUMMARY STEPS
1. switch# configuration terminal
2. switch(config)# vsan database
3. switch-config-db# vsan 2
4. switch(config-vsan-db)# no vsan 5
5. switch(config-vsan-db)# end
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
98
the ports do not automatically get assigned to that VSAN. You must explicitly reconfigure the port
VSAN membership (see the figure below).
when the VSAN is deleted.
Configuring and Managing VSANs
OL-xxxxx-xx