Displaying The In-Order Delivery Status; Configuring The Drop Latency Time - Cisco Nexus 5000 Series Configuration Manual

Configuring Fibre Channel Routing Services and Protocols
DETAILED STEPS
Command or Action
Step 1
switch# configuration terminal
Step 2
switch(config)# in-order-guarantee vsan vsan-id
Step 3 switch(config)# no in-order-guarantee vsan vsan-id

Displaying the In-Order Delivery Status

Use the show in-order-guarantee command to display the present configuration status:
switch# show in-order-guarantee
global inorder delivery configuration:guaranteed
VSAN specific settings
vsan 1 inorder delivery:guaranteed
vsan 101 inorder delivery:not guaranteed
vsan 1000 inorder delivery:guaranteed
vsan 1001 inorder delivery:guaranteed
vsan 1682 inorder delivery:guaranteed
vsan 2001 inorder delivery:guaranteed
vsan 2009 inorder delivery:guaranteed
vsan 2456 inorder delivery:guaranteed
vsan 3277 inorder delivery:guaranteed
vsan 3451 inorder delivery:guaranteed
vsan 3452 inorder delivery:guaranteed

Configuring the Drop Latency Time

You can change the default latency time for a network, a specified VSAN in a network, or for the entire switch.
To configure the network and the switch drop latency time, perform this task:
SUMMARY STEPS
1. switch# configuration terminal
2. switch(config)# fcdroplatency network value
3. switch(config)# fcdroplatency network value vsan vsan-id
4. switch(config)# no fcdroplatency network value
DETAILED STEPS
Command or Action
Step 1 switch# configuration terminal
Step 2 switch(config)# fcdroplatency network value
OL-xxxxx-xx
Purpose
Enters configuration mode.
Enables in-order delivery in the specified VSAN.
Reverts the switch to the factory defaults and disables the
in-order delivery feature in the specified VSAN.
Purpose
Enters configuration mode.
Configures network drop latency time for the network. The valid
range is 0 to 60000 msec. The default is 2000 msec.
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
In-Order Delivery
157