About Fibre Channel Routes; Configuring Fibre Channel Routes - Cisco Nexus 5000 Series Configuration Manual

Nx-os san switching configuration guide
Hide thumbs Also See for Nexus 5000 Series:
Table of Contents

Advertisement

Configuring Fibre Channel Routing Services and Protocols

About Fibre Channel Routes

Each port implements forwarding logic, which forwards frames based on its FC ID. Using the FC ID for the
specified interface and domain, you can configure the specified route (for example, FC ID 111211 and domain
ID 3) in the switch with domain ID 1 (see the following figure).
Figure 28: Fibre Channel Routes

Configuring Fibre Channel Routes

To configure a Fibre Channel route, perform this task:
SUMMARY STEPS
1. switch# configuration terminal
2. switch(config)#fcroute fcid interface fc slot/port domain domain-id vsan vsan-id
3. switch(config)#fcroute fcid interface san-port-channel port domain domain-id vsan vsan-id
4. switch(config)# fcroute fcid interface fc slot/port domain domain-id metric value vsan vsan-id
5. switch(config)#fcroute fcid interface fc slot/port domain domain-id metric value remote vsan vsan-id
6. switch(config)#fcroute fcid netmask interface fc slot/port domain domain-id vsan vsan-id
DETAILED STEPS
Command or Action
Step 1
switch# configuration terminal
Step 2
switch(config)#fcroute fcid interface fc slot/port
domain domain-id vsan vsan-id
Step 3
switch(config)#fcroute fcid interface
san-port-channel port domain domain-id vsan
vsan-id
Step 4
switch(config)# fcroute fcid interface fc
slot/port domain domain-id metric value vsan
vsan-id
OL-xxxxx-xx
Purpose
Enters configuration mode.
Configures the route for the specified Fibre Channel interface and
domain. In this example, the specified interface is assigned an FC ID
and a domain ID to the next hop switch.
Configures the route for the specified SAN port channel interface and
domain. In this example, interface san-port-channel 1 is assigned an
FC ID (0x111211) and a domain ID to the next hop switch.
Configures the static route for a specific FC ID and next hop domain
ID and also assigns the cost of the route.
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
FSPF Routes
153

Advertisement

Table of Contents
loading

Table of Contents