Default Fibre Channel Domain Settings - Cisco Nexus 5000 Series Configuration Manual

Default Fibre Channel Domain Settings

The following example shows how to display all existing, persistent FC IDs for a specified VSAN. You can
also specify the unused option to view only persistent FC IDs that are still not in use.
switch# show fcdomain fcid persistent vsan 1000
The following example shows how to display frame and other fcdomain statistics for a specified VSAN or
SAN port channel:
switch# show fcdomain statistics vsan 1
VSAN Statistics
The following example shows how to display FC ID allocation statistics including a list of assigned and free
FC IDs:
switch# show fcdomain address-allocation vsan 1
The following example shows how to display the valid address allocation cache. The cache is used by the
principal switch to reassign the FC IDs for a device (disk or host) that exited and reentered the fabric. In the
cache content, VSAN refers to the VSAN that contains the device, WWN refers to the device that owned the
FC IDs, and mask refers to a single or entire area of FC IDs.
switch# show fcdomain address-allocation cache
Default Fibre Channel Domain Settings
The table below lists the default settings for all fcdomain parameters.
Table 10: Default fcdomain Parameters
Parameters
fcdomain feature
Configured domain ID
Configured domain
auto-reconfigure option
contiguous-allocation option
Priority
Allowed list
Fabric name
rcf-reject
Persistent FC ID
Allowed domain ID list configuration distribution
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
48
Number of Principal Switch Selections: 5
Number of times Local Switch was Principal: 0
Number of 'Build Fabric's: 3
Number of 'Fabric Reconfigurations': 0
Configuring Domain Parameters
Default
Enabled
0 (zero)
Preferred
Disabled
Disabled
128
1 to 239
20:01:00:05:30:00:28:df
Disabled
Enabled
Disabled
OL-xxxxx-xx