Authorization Scenario - Cisco Nexus 5000 Series Configuration Manual

Auto-Learning
Table 35: Authorized Auto-Learning Device Requests
Condition
1
2
3
4
5
6
7

Authorization Scenario

Assume that the port security feature is activated and the following conditions are specified in the active
database:
• A pWWN (P1) is allowed access through interface fc2/1 (F1).
• A pWWN (P2) is allowed access through interface fc2/2 (F1).
• A nWWN (N1) is allowed access through interface fc2/2 (F2).
• Any WWN is allowed access through interface vfc3/1 (F3).
• A nWWN (N3) is allowed access through any interface.
• A pWWN (P3) is allowed access through interface fc2/4 (F4).
• A sWWN (S1) is allowed access through interface fc3/1-3 (F10 to F13).
• A pWWN (P10) is allowed access through interface vfc4/1 (F11).
The following table summarizes the port security authorization results for this active database.
Table 36: Authorization Results for Scenario
Device Connection
Request
P1, N2, F1
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
222
Device (pWWN, nWWN, Requests Connection to
sWWN)
Configured with one or A configured switch port
more switch ports
Any other switch port
Not configured A switch port that is not
configured
Configured or not A switch port that allows
configured any device
Configured to log in to Any port on the switch
any switch port
Not configured A port configured with
some other device
Authorization Condition
Permitted 1
Configuring Port Security
Authorization
Permitted
Denied
Permitted if auto-learning
enabled
Denied ifauto-learning
disabled
Permitted
Permitted
Denied
Reason
No conflict.
OL-xxxxx-xx