Causes Of Out-Of-Range Results - OneTouch Select Plus Flex Instructions For Use Manual

Yellow= 5mm Red=7mm margin
Taking a test
3

Causes of out-of-range results

Out-of-range results may be due to:
Not following the instructions for performing a control
solution test.
Control solution is contaminated, expired, or past its
discard date.
Test strip or test strip vial is damaged, expired, or past
its discard date.
Meter, test strips and/or control solution were not all at
the same temperature when the control solution test
was performed.
A problem with the meter.
Dirt or contamination in the small well on the top of the
control solution cap.
CAUTION:
If you continue to get control solution results that fall
outside the range printed on the control solution vial, Do
Not use the meter, test strips, or control solution. Contact
Customer Service. Contact OneTouch® Customer Care on
0800 121 200 (UK) or 1800 535 676 (Ireland).
Type: Project File Name: 3130451 Revision: 1
Effectivity Date: Mar 18 2015
Statement of Use: Verify status before each use
PF3130451Rev1_OTSPF_OB_I_GB_en_zug_R2.indd 70
70
Status: Current State: Released
3/12/15 11:36 AM