Adjusting The Time And Date Settings Afterfirst Time Setup - OneTouch Select Plus Flex Instructions For Use Manual

Yellow= 5mm Red=7mm margin
Setting up your system
2
Adjusting the time and date settings after
first time setup
You can adjust the meter's time and date settings after
first time setup. Press and hold
then press and hold
screen will appear. See page 76.
After adjusting the settings, your meter will exit settings
mode and your last result screen will appear.
Type: Project File Name: 3130451 Revision: 1
Effectivity Date: Mar 18 2015
Statement of Use: Verify status before each use
PF3130451Rev1_OTSPF_OB_I_GB_en_zug_R2.indd 26
to turn the meter on,
and at the same time. The SET
26
Status: Current State: Released
3/12/15 11:35 AM