Yellow= 5mm Red=7mm margin
Preparing the lancing device
1. Remove the lancing device cap
Remove the cap by turning
it counterclockwise and then
pulling it straight off of the
device.
Type: Project File Name: 3130451 Revision: 1
Effectivity Date: Mar 18 2015
Statement of Use: Verify status before each use
PF3130451Rev1_OTSPF_OB_I_GB_en_zug_R2.indd 41
Taking a test
3
41
Status: Current
State: Released
3/12/15 11:35 AM